DT-500-AH-FS

Adjustable Handle Full Stroke Lever Press

The Left/Right Adjustable Handle Press was designed to benefit the left handed production worker, but it also can come in handy when the operator needs to hold tooling or parts with their right hand and operate the press from the left for assembly convenience and flow. The handle can be rotated on either side in 30° degree increments 360° degrees.Janesville Tool & Manufacturing's Full Stroke Mechanism Presses are designed to eliminate the production of inferior parts caused by incomplete pressing.

With the use of an anti-return lock system the operator cannot return the stroke before the operation is complete. (Lock is active over the whole stroke not just the last part of the stroke).

The presses are equipped with an Adjustable Down Stop (ADS), Up Stroke Limiter (USL), and a Lock Release Knob which can be used if the pressing operation needs to be aborted to avoid the making of a defective part.

This option is currently available on JT&M, Inc. manual presses (ILP-500, DT-500, AP-810, and AP-810-RR) including (AH) models. Add Suffix (-FS) to the end of the model number when ordering.

With repeat accuracy of +/-.005 the presses are ideal for small-parts production and precision assembly by installing a line of them each tooled for a specific operation.

The DT-500 Deep Throat Lever Press utilizes the same 5/8" diameter precision ram as the popular ILP-500, and allows the user throat clearance of 6 inches. The model DT-500 precision assembly press consists of a ground cast iron base and separate column. The base consists of two (2) mounting holes for 1/4" socket cap screws. These holes can be tapped from the bottom for 5/16" screws on special request. The clearance under the column can be increased by adding a riser block between the ground base and column flange. The 5/8" diameter hole in the base is precisely aligned to the ram allowing for simplified tooling designs.

Options:

• Adjustable Down Stop (Model ADS)
• Up-Stroke Limiter (Model USL)
• Die Sets
• Counter & Bracket (Model PC-500)
• Riser Blocks
• Adjustable Handle Add suffix (-AH)
• Full Stroke Lock Add suffix (-FS)
• FS-500 Retrofit Service